Car and engine specification:
BMW M235i xDrive F44, Gran Coupé (5door) 10/2019 --> =>
2.0l TURBO 225kW (with GPF)
REMUS AXLE-BACK-SYSTEM L/R
- 100% stainless steel
- Powerful sound
- Performance and torque increase
- Light weight construction
- Made in Austria
INFOBOX:
- Axle-Back-System L/R: 754019 0000 + 754019 1500 or 754519 1500 (no EC type approval) + 080020 0020 or 080020 0040 + tail pipe set! The original exhaust must be cut! No rear skirt modifications required!
- RACING-Cat-Back-System L/R: 754019 1000 (no EC type approval) + 754019 0000 + 754019 1500 or 754519 1500 (no EC type approval) + 080020 0020 or 080020 0040 + tail pipe set! No vehicle modifications required!
The use of racing products and products which do not have EC approval is generally not permitted on public roads.
When fitting REMUS sports silencers, cat-back systems and cat replacement pipes designed for use on closed tracks, it is advantageous to carry out an ECU remapping, in order to exploit the optimum performance of the exhaust system and to prevent the check engine from lighting up.
Part. Nr. | Description |
754019 1000 | Non-resonated RACING Cat-back-section (GPF replacement section) Original tube Ø 70 mm - REMUS tubeØ 70 mm |
754019 0000 | Connection tube |
754019 1500 | Sport exhaust centered for L/R-system Original tube Ø 70 mm - REMUS tube Ø 70 mm |
754519 1500 | RACING sport exhaust centered for L/R-system Original tube Ø 70 mm - REMUS tube Ø 70 mm |
080020 0020 | tail pipe adaptor |
080020 0040 | tail pipe adaptor |
Choose from following tail pipe package: | |
0046 83CSR | stainless steel tail pipe set 4 tail pipes Ø 84 mm Carbon Race, angled, carbon ring, with adjustable spherical clamp connection |
0046 83CBR | stainless steel tail pipe set 4 tail pipes Ø 84 mm Street Race Black Chrome, straight, carbon insert, with adjustable spherical clamp connection |
0046 83CTSR | Carbon tail pipe set 4 Carbon tail pipes Ø 84 mm angled, Titanium internals , with adjustable spherical clamp connection |
0046 55SR | stainless steel tail pipe sett 4 tail pipes Ø 84 mm angled, rolled edge,with adjustable spherical clamp connection |
DISCLAIMER
The products of REMUS Innovation GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.
The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.
Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.