NEW DEVELOPMENT 2021 | #01 VW Golf 8 GTI PERFORMANCE EXHAUST SYSTEM



Car and engine specification:

VW Golf 8 GTI, Type CD, 08/2020=>
2.0l TSI 180 kW (with GPF)

REMUS GPF-back exhaust system dual L/R


  • 100% stainless steel exhaust system
  • Powerful sound
  • Performance and torque increase
  • Light weight construction
  • Made in Austria

INFOBOX:

  • GPF-back exhaust system dual L/R: 951020 0300 + 951020 1000 + 955213 0000 + 951020 1500 + tail pipe set! No vehicle modifications required!
  • RACING GPF-back exhaust system dual L/R: 951020 1300 (no EC type approval) + 951020 1000 + 955213 0000 + 951020 1500 + tail pipe set! No vehicle modifications required!

The use of racing products and products which do not have EC approval is generally not permitted on public roads.

When installing REMUS axle-back and cat-back or catalyst delete tubes on vehicles which are used for closed road driving, it is advisable to tune the ECU for a maximum gain in performance and to ensure that the CEL does not pop up.

Part no. Description
951020 1000

intermediate pipe from GPF-back-front section
or non resonated GPF-front section to connection tube of the sport exhaust

955213 0000

Connection tube for mounting of the sport exhaust

951020 1500

Sport exhaust centered for L/R system
(without tail pipes)

Original tube Ø 65 mm - REMUS tubeØ 70 mm
incl. EC type approval

951020 0300

Resonated cat-back exhaust section
only mountable in combination with REMUS sport exhaust!

Original tube Ø 65 mm - REMUS tubeØ 70 mm
incl. EC type approval

951020 1300

Non resonated GPF-back section
only mountable in combination with REMUS sport exhaust

Original tube Ø 65 mm - REMUS tube Ø 70 mm
no EC type approval

Choose from following tail pipe package::
0026 70CSR

carbon tail pipe set

2 Carbon-tail pipesØ 102 mm angled, titanium internals, with adjustable spherical clamp connection

0026 70SGR

stainless steel tail pipe set

2 tail pipes Ø 102 mm, angled, straight cut, chromed, with adjustable spherical clamp connection

0026 70SR

stainless steel tail pipe set

2 tail pipesØ 102 mm angled, rolled edge, chromed, with adjustable spherical clamp connection

0026 80SABR

stainless steel tail pipe set

2 tail pipesØ 115 mm angled, engraved, Black Chrome, with adjustable spherical clamp connection

0026 80SAR

stainless steel tail pipe set

2 tail pipesØ 115 mm angled, engraved, chromed, with adjustable spherical clamp connection

DISCLAIMER

The products of REMUS Innovation GmbH („REMUS“) are distributed worldwide. REMUS and its affiliates shall not assume any obligations, warranties, guarantees or other liabilities for the fact that the products manufactured by REMUS comply with the applicable law of the respective country of destination or may be used without (official) approval. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition.

The buyer shall be solely responsible for obtaining all whatsoever approvals and permissions required by the respective national law for suchlike products and shall be solely responsible for ensuring that the products manufactured by REMUS comply with the approvals required for the respective usage in the country of destination.

Intended use in Austria:
Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967. They are not intended for vehicles used on public roads. The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage.

Share: